Fast Flash is an environmentally friendly and a lead-free flashing solution. It uses a specially formulated polymer rubber reinforced with aluminium mesh that makes it the most flexible and easy to work with flashing solution.
Fast Flash can be installed on roofs with a slope of min. 5°. No other product on the market delivers such an attractive finish, dressing down perfectly to all roofing material profiles. It has a fully adhesive base that makes it easy to install, requiring 50% less time than other lead based solutions.
Available in Black, Grey, Anthracite & Red
Available in:
280mm x 5 metre roll
370mm x 5 metre roll
560mm x 5 metre roll
Deks Rapid Flash replaces traditional lead based flashing. Rapid Flash incorporates a cleverly designed mesh that is free from toxic materials.
The solution has been designed to suit both metal and tiled roofs whilst incorporating a paintable surface that can be adapted to suit different roof colours.
UV rated.
Currently stocked in the following sizes:
DRF100GB (6-50mm) 280x450mm
DRF101GB (5-127mm) 370x560mm
DRF102GB (50-70mm) 370x560mm
DRF103GB (50-170mm) 370x560mm
DRF108GB (170-330mm) 560-850mm
Flash over or around.
A standard Dektite and Retrofit all in one. Clips included.
Currently stock in the following sizes:
#1 Black (DC101BC) 5-60mm/0.25-2.5" + Clips
#2 Black (DC102BC) 45-85mm/1.75-3.25"+ Clips
#3 Black (DC103BC) 5-127mm/0.25-5" + Clips
#4 Black (DC104BC) 75-175mm/3-7" + Clips
#5 Black (DC105BC) 108-190mm/4.25-7.5" + Clips
#6 Black (DC106BC) 125-230mm/5-9" + Clips
#7 Black (DC107BC) 150-280mm/6-11" + Clips
#8 Black (DC108BC) 175-330mm/7-13") + Clips
Perfect for flashing pipes on metal roofs.
A multi-application flashing with a highly durable EPDM cone and base, edged with a flexible aluminium strip. Flashes hot or cold flues and pipes on metal roofs. The square base fits any prepared hole on most roof profiles.
Currently stocked in the following sizes and colours:
#1 in Black (DFE101B) 5-55mm/0.25-2.25"
#2 in Black (DFE102BA) 50-70mm/2-2 3/4"
#3 in Black (DFE103BA) 5-127mm/0.25-5"
#4 in Black (DFE104B) 75-175mm/3-7"
#5 in Black (DFE105B) 100-200mm/4-8"
#6 in Black (DFE106B) 125-230mm/5-9"
#7 in Black (DFE107B) 150-300mm/6-12"
#8 in Black (DFE108B) 170-355mm/6.75-14"
#9 in Black (DFE209B) 230-508mm/9-20"
Also available in Red Silicone and Grey
Red Silicone will withstand a constant temperature at the roofline of 200ºC and up to 250ºC intermittently.
Dektite EZi-Seal is a revolutionary flashing solution that can just be screwed down without the need for silicone. It incorporates a revolutionary closed-cell foam gasket that hugs the roof line to provide a watertight seal. The foam is non-absorbent, non-porous, UV rated and temperature resistant.
Currently stocked in:
#7 in Black (DFE107BEZ) 150-300mm/6-12"
VP106
2.5mm GSSW
Sold in bags of 100 or a carton of 2000
Eliminates the possibility of cuts falling out of place.
Simple to install and will keep the small cuts in place.
VP101
2.5mm GSSW
Sold in bags 100 or a carton of 2000
User friendly for the tradesman and provide an effective and high performing option for securing all roof tiles at the head of the tile to roofing battens - including metal.
HL011C
Terracotta Roof Tiles
Modern French
Nubrik Marsielle on 50 x 25 Battens
Sold in bags of 100 or a carton of 2000
Head Lap Clip 30
Suits Boral Montoro French on 50 x 25
Swiss 38 x 25
Terracotta Shingle 38 x 25
CSR Nullabor 38 x 25
Swiss on Tilesafe 600
Bristile Planum 30 x 25
Marseille's
Sold in Bags of 100 or carton of 2000
Short course clips assist in the installation of short courses under dutch gables, wallers over secret gutters and "tile cuts" along hip lines. The short course clip also enables maximum gauging for tiled roofs.
75mm LAP
Sold in bags of 100 or a carton of 2000
Short course clips assist with the installation of short courses under dutch gables, wallers over secret gutters and "tile cuts" along hip lines. The short course clip also enables maximum gauging for tiled roofs.
100mm LAP
Sold in bags of 100 or a carton of 2000
Standard concrete profiled tiles on metal batten base 92mm
Sold in bags of 100 or a carton of 1000
Mission Tiles on Metal Batten Base 92mm
Sold in Bags of 100 or a carton of 1000
Shingle Tiles on Metal Batten base 92mm
Sold in bags of 100 or a carton of 1000
Cyclone Clip
Suitable for 38 x 25 batten, depending on the tile profile.
Sold in bags of 100 or carton of 500
Stormseal has been designed to seal valleys and perimeters of Australian roof tiles, as well as the entire perimeter of steel roofs. RFS Stormseal can form an effective seal against birds and rodents, wind driven rain and dust.
Stormseal has also been fire tested and is an effective barrier against bushfires when used to seal perimeter rooflines.
Stormseal is made from Polyurethane foam impregnated with bitumen emulsion (water based) and is flame resistant.
7 year warranty
The colour is Dark Charcoal and is sold in 2m lengths individually or as a carton (54 x 2m lengths).
Contact us today for more information and expert advice on our complete range.