EPiC Aqua Epoxy (2 Pack water based Epoxy)

EPiC Aqua Epoxy (2 Pack water based Epoxy)

Is a low odour two pack water based epoxy used for interior floors and food preparation areas where impervious floor barriers are required. Excellent durability and chemical resistance.

Available in:
Clear Gloss
Limited colour range of Light Grey N35
Addtional colours avaiable ex. Melbourne - Dark Grey N64, Birch Grey N25, Neutral Grey N23, Sand Y44, Terracotta, Slate G64, White, Black

Additional products to use with:
2 Pack Anti Slip (Coarse or Fine)

*Interior use only.
*Ultra low VOC formula available
*Suitable for pedestrian and vehicle traffic

EPiC Aquafloor

EPiC Aquafloor

Is a low odour two pack water based polyurethane, providing excellent hardness and scuff resistance. Used for a wide range of interior, commercial and industrial floors.

Available in Clear or Coloured Gloss finish

Additional products to use with:
2 Pack Anti Slip (Coarse or Fine)

*Suitable for pedestrian and vehicle traffic

EPiC Polycryl

EPiC Polycryl

Is a two pack cross linking oil modified acrylic coating which has excellent durability and chemical resistance for both interior and exterior use. Applied over a wide range of concrete surfaces plus timer floors and metal surfaces that have been correctly primed with appropriate EPiC primer.

Available in Clear or Coloured Gloss finish.

Additional products to use with:
X5 Solvent
2 Pack Anti Slip (Coarse or Fine)

*Suitable for pedestrian and vehicle traffic

EPiC Epoxy 100

EPiC Epoxy 100

Is a solventless two pack epoxy. Used for self levelling or high build non slip interior flooring and coving when mixed with silica sand. An attractive finish is achieved by overcoating with coloured EPiC Epoxy 500. Excellent durability and chemical resistance.

Available in Clear Gloss finish only.

*Interior use only
*Suitable for pedestrian and vehicle traffic

Anti Slip Cast On – Fine and Coarse Grades

Anti Slip Cast On – Fine and Coarse Grades

AntiSlip Cast On is a quartz based anti-slip cast on additive exhibiting high tensile strength. AntiSlip Cast On
significantly increases the friction coefficient of a 2 pack coated surface, reducing slip potential under both
wet and dry conditions. Developed to be hand broadcast onto the surface of Nutech Paint 2 pack floor
coating systems such as; EPiC Epoxy 500, EPiC PolyCryl, EPiC AquaFloor and EPiC AquaEpoxy.

Available in:
Coarse - 7kg & 25kg
Fine - 5kg & 25kg

Seal Repair Solution

Seal Repair Solution

Is recommended to rectify sealer adhesion problems. Re-sealing of concrete can sometimes cause problems due to old or incorrectly applied sealer. Typically the sealed surface becomes silvery white and loses colour and appeal, these surfaces look good when the surface is wet and the whiteness reappears when it dries.

Categories:

Available Sizes:

10 litre20 litre

Reactivating Solvent

Reactivating Solvent

Used to re-dissolve old concrete sealer prior to re-applying a new coat of sealer. The product contains a strong blend of solvents, which liquefy old sealers faster and more efficiently than conventional thinners.

*Not suitable for brittle damaged and delaminating sealer (refer to Seal Repair Solution).

Categories:

Available Sizes:

4 litre10 litre20 litre

EcoSafe MossRid

EcoSafe MossRid

Nu-EcoSafe MossRid is a pure, organic, non-toxic contact cleaning solution for the removal of moss, lichen, and mould from almost any surface area.

Categories:

More Information:
Available Sizes:

2.5 litre5 litre10 litre

08 9459 1139

Contact us today for more information and expert advice on our complete range.